Kaleidoscope Pre-Mixed Paint Supreme Enamel Gloss Flame Red

Kaleidoscope Supreme Gloss Enamel is a premium long oil modified alkyd enamel paint specially formulated for tropical weather conditions, combining beauty, durability, and economy in one high-performance coating. Designed for both interior and exterior applications, this enamel paint provides a smooth, uniform high-gloss finish that enhances and protects a variety of properly prepared surfaces.

Ideal for wood, metal, and concrete, Kaleidoscope Supreme Gloss Enamel is suitable for both residential and commercial projects where a polished, durable finish is desired. Its moisture resistance, easy-clean surface, and anti-fungal properties make it a practical and attractive option for areas that need both visual appeal and reliable protection.

Why Choose Kaleidoscope Supreme Gloss Enamel?

• Rich high-gloss finish
• Strong adhesion
• Moisture resistant
• Economical and durable
• Helps provide a smooth, even topcoat
• Anti-fungal
• Easy to apply
• Easy to clean

Recommended Uses

Kaleidoscope Supreme Gloss Enamel is recommended for use on:

• Woodwork
• Metal surfaces
• Concrete surfaces
• Interior and exterior areas

Note: Surfaces should be properly primed before application for best results.

Coverage & Performance

This product offers an approximate coverage of 33–37 m² per 0.95 litre, depending on the porosity and condition of the surface.

Drying Times:

• Touch Dry: 4–6 hours
• Recoatable: 16–18 hours
• Hard Dry: Overnight

Application

Kaleidoscope Supreme Gloss Enamel can be applied by:

• Brush
• Roller
• Spray

For spray application, the paint may be thinned by up to 10% (approximately 370 ml per 3.8 litres) using the appropriate thinner.

Recommended Primers

For best adhesion and finish, use the recommended primer based on the surface type:

• Masonry: Kaleidoscope Alkali Sealer
• Wood: Kaleidoscope Universal Undercoat
• Iron and Steel: Kaleidoscope Zinc Chromate Primer / Kaleidoscope Red Oxide Zinc Chromate Primer
• Aluminium, Galvanise, Zinc: Kaleidoscope Etch Primer

Surface Preparation

For best results, all surfaces should be clean, dry, and free from dirt, grease, wax, loose or flaking paint before application.

• New woodwork should be sanded smooth, treated where necessary, undercoated, and then finished with two coats.
• Metal surfaces should be cleaned, rust removed if present, primed appropriately, and then top coated.
• Previously painted surfaces should be cleaned thoroughly and any loose or peeling material removed before repainting.

Important Notes

• Always stir well before use
• Allow proper drying time between coats
• When using more than one can of the same colour, it is recommended to mix them together before application for colour consistency

Limitations of Use

Kaleidoscope Supreme Gloss Enamel:

• Has limited exterior durability
• Is not recommended for floors
• Is not suitable for immersion surfaces